热膨胀系数异性轴夹角优化分析

高超声速飞行器需要先进的材料进行热防护,比如增强碳/碳材料.有两种将碳纤维制作成碳/碳球锥外形的工艺,研究表明在每种工艺中,碳/碳块体或碳纤维热膨胀系数异性轴角度对结构热应力影响很大,为此本文发展了一套优化设计方法,对给定的对流加热温度场可以实现球锥热应力的最小化.分析结果表明对于热膨胀系数异性轴角度,存在某些取值点,那时结构热应力分别达到最大和最小值.在异性轴模晕小于同性平面模量的条件下,对于工艺1,如果将球锥对称轴设置成垂直于碳/碳块体的同性平面,可以将热应力减至最小;对于工艺2,如果能将编制面内的碳纤维束异性轴角度取成负值(即指向来流方向),则球锥热应力也可以得到相当程度的减小.     

Deriving Energy-Gap of Some Nonlinear Hamiltonians by Invariant Eigen-operator Method

By virtue of the invariant eigen-operator method we search for the invariant eigen-operators for some Hamiltonians describing nonlinear processes in particle physics. In this way the energy-gap of the Hamiltonians can be naturally obtained. The characteristic polynomial theory has been fully employed in our derivation.     

Restudy on Dark Matter Time-Evolution in the Littlest Higgs Model with T-Parity

Following previous study, in the littlest Higgs model （LHM）, the heavy photon is supposed to be a possiL dark matter candidate and its relic abundance of the heavy photon is estimated in terms of the Boltzman- Lee-Weinba time-evolution equation. The effect of the T-parity violation is also considered. Our calculations show that when Higmass MH taken to be 300 GeV and do not considering T-parity violation, only two narrow ranges 133 〈 MAH 〈 135 Ge and 167 〈 MAH〈 169 GeV are tolerable with the current astrophysical observation and if 135 〈 MAH 〈 167 GeV there must at least exist another species of heavy particle contributing to the cold dark matter. As long as the T-pari; can be violated, the heavy photon can decay into regular standard model particles and would affect the dark matt abundance in the universe, we discuss the constraint on the T-parity violation parameter based on the present dat Direct detection prospects are also discussed in some detail.     

RF deflecting cavity design for bunch length measurement of photoinjector at Tsinghua University

RF deflecting cavity can be used for bunch length measurement and is designed to diagnose the beam produced by the photocathode electron gun which was built at Tsinghua University for the Thomson scattering experiment. Detailed discussion and calculation for measuring the 3.5 MeV bunch and another with further acceleration to 50 MeV, which is under development, are presented. A standing-wave deflecting cavity working at 2856 MHz is designed and the power feeding system has been planned.     

HL-2A装置ECRH水冷却系统的研制

研制了压强达0.6MPa总流量达94m3•h-1的HL-2A装置电子回旋共振加热水冷却系统,介绍了该系统的设计、水压控制和参数 测量。计算了水压降和高电压环境中水电阻,测得的回旋管阳极水回路中的漏电流小于1mA。     

Tm-Doped Fibre Laser Pumped Cr^2＋：ZnSe Poly-Crystal Laser

Demonstrations of cw lasing in Cr^2＋：ZnSe poly-crystal are reported. The laser consists of a 1.7-mm-thick Cr^2＋ ：ZnSe poly-crystal disc pumped by a Tin-silica double-clad fibre laser at 2050nm. Using a concave high- reflection mirror with a radius of curvature of 500mm as the rear mirror, the laser delivers up to 1030mW of radiation around 2.367μm.     

Coupling Effect of Ion Channel Clusters on Calcium Signalling

Based on a modified intracellular Ca^2＋ model involving diffusive coupling of two calcium ion channel dusters, the effects of coupling on calcium signalling are numerically investigated. The simulation results indicate that the diffusive coupling of dusters together with internal noise determine the calcium dynamics of single duster, and for either homogeneous or heterogeneous coupled dusters, the synchronization of dusters, which is important to calcium signalling, is enhanced by the coupling effect.     

Optical Properties of Co-BaTiO3/Mg（100） Nano-Composite Films Grown by Pulsed Laser Deposition Method

Co nanoparticles embedded in a BaTiO3 matrix, namely Co-BaTiO3 nano-composite films are grown on Mg（100） single crystal substrates by the pulsed laser deposition （PLD） method at 650℃. Optical properties of the CoBaTiO3 nano-composite films are examined by absorption spectra （AS） and photoluminescence （PL） spectra. The results indicate that the concentration of Co nano-particles strongly influences the electron transition of the Co BaTiO3 nano-composite films. The PL emission band ranging from 1.9 to 2.2eV is reported. The AS and PL spectra suggest that the band gap is in the range of 3.28-3.7eV.     

Experimental Characterization of Sub-picosecond Electron Bunch Length with Coherent Diffraction Radiation

Diffraction radiation is one of the most promising candidates for electron beam diagnostics for the International Linear Collider, x-ray free electron lasers and energy recovery linac due to its non-intercepting characteristics. We report the non-intercepting measurement of sub-ps electron bunch length with coherent diffraction radiation. The bunch length is measured with a Martin--Puplett interferometer and the detailed longitudinal bunch shape is reconstructed with the Kramers--Kronig relation. The rms bunch length is found to be about 0.73ps, which confirms a successful commissioning of the bunch compressor and the interferometer.     

Molecular Dynamics Study of Mechanical Behaviour of Screw Dislocation during Cutting with Diamond Tip on Silicon

By means of Tersoff and Morse potentials, a three-dimensional molecular dynamics simulation is performed to study atomic force microscopy cutting on silicon monocrystal surface. The interatomic forces between the workpiece and the pin tool and the atoms of workpiece themselves are calculated. A screw dislocation is introduced into workpiece Si. It is found that motion of dislocations does not occur during the atomic force microscopy cutting processing. Simulation results show that the shear stress acting on dislocation is far below the yield strength of Si.